BLUETTI Germany: FridgePower and BlueCell 200 for Refrigerator Backup

BLUETTI's German catalogue spans portable power stations, solar bundles and home backup products. FridgePower and its BlueCell 200 expansion battery form a more specific system: a slim indoor battery intended to keep a refrigerator and selected essentials running during an outage. The two products are complementary rather than interchangeable.

FridgePower is the powered base unit

The official German listing gives FridgePower a 2,016 Wh battery capacity, 1,800 W continuous output and 3,600 W peak output. Its enclosure is 75 mm deep and can be installed flat, vertically or on a wall. That shape is relevant in a kitchen or apartment where a conventional power station may occupy too much floor space.

BLUETTI specifies a 10 ms uninterruptible-power-supply switchover. In practice, that is the feature intended to keep a connected refrigerator powered when mains electricity fails without requiring a manual cable change. The company also states a 4 W standby draw. Neither specification guarantees a particular refrigerator runtime: compressors have different running consumption and start-up demand, and other connected appliances reduce the available duration.

The unit can be monitored through the BLUETTI app for battery level, outage state and charging progress. The listing also names Amazon Alexa, Google Home and Home Assistant compatibility. Those integrations are optional conveniences, not prerequisites for basic backup power, and they may depend on a working local network or internet connection.

BlueCell 200 adds capacity but cannot replace FridgePower

BlueCell 200 is a 2,016 Wh LiFePO4 expansion battery designed specifically for FridgePower. It is not presented as a standalone power station: it has to connect to the FridgePower base system. BLUETTI says that as many as three expansion units can be stacked, taking the combined system to 8,064 Wh.

The product page states more than 4,000 charge cycles for its LiFePO4 cells and says an installation kit is included. Treat the cycle figure as the manufacturer's specification under its test conditions, not a promise of a fixed calendar lifespan. Temperature, depth of discharge, storage and use pattern all affect long-term battery behaviour.

Work from measured load, not headline capacity

A 2,016 Wh capacity figure cannot be divided directly by an appliance's label wattage to produce an exact runtime. Conversion losses, standby draw, compressor cycling and start-up peaks all matter. A sensible plan starts with the refrigerator's measured energy use over a representative day and then leaves a reserve rather than assuming the entire nominal capacity is usable.

The 1,800 W continuous and 3,600 W peak ratings also need separate treatment. Continuous output is the sustained limit; peak capacity is intended for short start-up events. Buyers should verify that every appliance connected at once stays within the sustained rating and that a compressor's start-up demand is supported.

Who should consider each configuration?

FridgePower alone is the simpler option for a household that wants a slim, automatic refrigerator backup and whose measured outage requirement fits one 2,016 Wh unit. One or more BlueCell 200 batteries make sense where longer autonomy is necessary and there is suitable mounting or floor space.

The system is not a substitute for a whole-home electrical design. Installation method, cable routing, ventilation, permitted loads and any interaction with fixed wiring should follow the official instructions and, where required, qualified electrical advice. The reviewed pages do not establish a current euro price, delivery date or stock level, so those details are deliberately omitted.

Sources

BLUETTI Germany product pages for FridgePower and BlueCell 200 were checked on 21 September 2026.

Disclosure

Visit store